Keywords
COVID, PPE, iodine, disinfection, decontamination, virus
This article is included in the Emerging Diseases and Outbreaks gateway.
This article is included in the Coronavirus collection.
COVID, PPE, iodine, disinfection, decontamination, virus
One reviewer made several salient comments about the manuscript that warranted updates and revisions to this publication. The changes made include:
- Commentary added to the Discussion section to address the reviewer's point that the results described in this paper were collected from experiments in liquid suspension. These data represent preliminary studies on the efficacy of the copper iodine complex against SARS-CoV-2, and subsequent studies should be conducted where the copper iodine complex is assayed for efficacy against the virus on materials relevant to real life, such as cloth common on face masks.
- Added commentary to the Discussion about the need for follow-up studies to examine more closely the claims of safety and effects on skin of this copper iodine complex when used in combination with common face masks.
- Added further commentary in the Discussion section comparing the results collected with this copper iodine complex to other face mask decontaminations methods, and the relative merits of each, with commentary about potential follow-up studies to further examine these relative merits.
- Corrected the description of the statistical analysis used in this study. Originally, we erroneously stated that a Student's t-test was used, but this was incorrect - a two-way ANOVA with Dunnett's multiple comparisons test was used.
- Added standard deviations to Table 1
- Corrected various typos that were originally missed (e.g., Psuedomonas should be Pseudomonas)
See the authors' detailed response to the review by Paul Dabisch
In late 2019, the world saw the spread of a novel coronavirus (SARS-CoV-2) that caused a global pandemic (ongoing as of this writing) that has claimed the lives of more than 260,000 people and infected 3.8 million as of May 2020 (Johns Hopkins Coronavirus Resource Center, 2020). The spread of this virus has led governments worldwide to implement unprecedented and far-reaching public health guidelines and lockdowns in an effort to flatten the infection curve and reduce the burden on their respective healthcare systems. Healthcare workers currently have the highest risk of exposure and can easily become vectors of viral transmission. On April 16th 2020, the United Kingdom cabinet reported that 16.2% of positive cases were critical workers in NHS (Centre for Evidence-Based Medicine, 2020), and the United States-based CDC reported that up to 11% of positive cases were healthcare workers in some states (CDC, 2020a).
Symptomatic COVID-19 patients display symptoms including a dry cough, fever, shortness of breath and sore throat (CDC, 2020b), and in severe cases can experience severe pneumonia, pulmonary edema, organ failure, and death (Chen et al., 2020). The virus incubation period varies from 3 to 20 days, during which time a patient can be infectious while asymptomatic, as some evidence suggests (Bai et al., 2020). While all modes of transmission for SARS-CoV-2 are not completely understood, it is generally believed that the primary mechanism of transmission is through micron-sized droplets and aerosols produced when an infected person, sneezes, coughs, talks or breathes (WHO, 2020a). Accordingly, public health organizations around the world are urging citizens to practice physical distancing (i.e., “social distancing”), use facemasks when in public, frequently wash their hands, and disinfect commonly touched areas in their surroundings (CDC, 2020c; WHO, 2020b).
In most countries, many front-line healthcare professionals are required to wear approved N95 masks as well as face shields to protect themselves against infectious droplets and cross-contamination (CDC, 2020d). However, due to shortages of N95 masks and other protective PPE, health organizations including the CDC are now recommending extended use and reuse of PPE including N95 masks. These new recommended practices may put healthcare workers at additional risk if the PPE cannot be effectively disinfected between uses. Therefore, effective disinfection of protective masks and other PPE before reuse is critical (CDC, 2020e). One recent study (Fischer et al., 2020) validated several CDC-recommended PPE decontamination techniques by demonstrating effective disinfection of N95 masks using UV-radiation, dry heat, and hydrogen peroxide vapor application. However, authors showed that while ethanol was effective in disinfecting N95 masks, it also led to reduced filtration capacity in the mask. Another study suggested that ethanol- and chlorine-based disinfectants are not suitable for decontamination due to their capacity to adsorb on fabric material and interfere with their electrostatic properties, thereby reducing filtration capacity (Liao et al., 2020). In keeping with these findings, bleach, sanitizing wipes, and ethyl oxides are not recommended for use to decontaminate masks (SAGES, 2020). Recommended PPE decontamination methods (UV, dry heat, hydrogen peroxide vapors) cannot, however, be easily applied during times of extended daily use of PPE, warranting the need for new or additional disinfection methods that can be applied “on the go” in these settings without causing harm to adjacent skin.
Iodine-containing solutions such as povidone iodine (PVP-I) have been proven effective as surface disinfectants against a wide variety of viruses including influenza A, poliovirus, adenovirus type 3, mumps, SARS, MERS, and HIV (Eggers et al., 2015; Kawana et al., 1997; Wada et al., 2016), with some indication of greater viricidal spectrum of activity compared to other commercially available disinfectants. Furthermore, iodine-based formulations have also been shown to be an effective preventative method to reduce upper respiratory tract infections and oral tract pathogens (Eggers et al., 2018; Sakai et al., 2008).
Clyraguard copper iodine complex, developed by Clyra Medical Technologies, Inc., is a novel FDA-registered product intended to be used for decontaminating non-critical PPE. The formula has proven antimicrobial activity (FDA submission data, see here) and is cleared for use on skin and wounds. In contrast, other iodine-based products, such as Lugol’s Iodine and PVP-I, may cause staining and skin sensitivity.
In this study, Clyraguard copper iodine complex was assessed for its efficacy in inactivating SARS-CoV-2 using a Vero cell monolayer infection model to provide a basis for whether or not Clyraguard may represent a potentially effective tool to disinfect and prolong the useful protective life of PPE, as well as to provide additional antiviral protection to PPE such as masks.
Vero cells were obtained from ATCC and grown in DMEM (Corning) containing 1x L-glutamine and 1% MEM vitamins, and supplemented with 10% FBS (Gibco) and 1% penicillin/streptomycin (Gibco). Cells were incubated at 37°C in 5% CO2. Cells were used at 85–95% confluent growth.
The SARS-CoV-2 (USA-WA1/2020) virus was obtained from The World Reference Center for Emerging Viruses and Arboviruses (WRCEVA), University of Texas Medical Branch, Galveston, TX. All experiments involving infectious virus were conducted by S.P.’s laboratory at the University of Texas Medical Branch (Galveston, TX) in approved biosafety level 3 laboratories in accordance with institutional health and safety guidelines and federal regulations.
From the original stock, SARS-CoV-2 was propagated for one passage in infection medium (DMEM containing 1x L-Glutamine and 1% MEM vitamins, supplemented with 1% penicillin/streptomycin (Gibco) and 2% FBS) at 37°C in 5% CO2. Briefly, SARS-CoV-2 was added at a MOI of 0.01 to Vero cells and incubated 1 hour at 37°C. Viral inoculum was removed, and fresh infection medium added. Cells were incubated for an additional 48 hours before supernatant was collected. Supernatant was centrifuged for 5 minutes at 3000 rpm to remove cell debris. Virus stocks were stored at -80°C at a concentration of 1x106 median tissue culture infectious dose (TCID50) per mL.
Viral titers were measured by TCID50 on Vero Cells in 96-well plates. Each log10 dilution (10-1 through 10-6) of the virus was inoculated in quadruplicates. On day 4 post-infection, the cells were fixed with 10% formalin for 45 minutes and subsequently stained with crystal violet. Cleared wells were quantified to calculate titer.
Aliquots of stock virus (10 μl) were mixed with 90 μl of Clyra, diluted Clyra, or control solutions. Clyra was mixed either 1:10 or 1:100 with sterile saline for dilution. Room temperature water was used as a negative control for virus inactivation, while boiling water (water pre-heated to 100°C) was used as a positive control. All mixtures were incubated for 30 seconds, 10 minutes, 30 minutes, or 60 minutes at room temperature, at which time 900 µl infection medium was added to neutralize antiviral activity. Subsequently, the SARS-CoV-2 viral titer (TCID50/mL) for each test substance was determined. The experiment was conducted in triplicate.
Statistical significance was determined using a two-way ANOVA with Dunnett’s multiple comparisons test comparing against the control saline group. This was conducted using GraphPad Prism (software version 8.3.0). A p-value of 0.05 or below was considered statistically significant.
In this study, the ability of Clyraguard to inactivate SARS-CoV-2 at various timepoints and at various concentrations was assessed (Figure 1; Table 1). While diluted Clyraguard was unable to inactivate SARS-CoV-2 after any length of time, undiluted Clyraguard was effective at significantly reducing viral titers after just 10 minutes of incubation. After incubation with undiluted Clyraguard for 10 minutes, viral titers dropped by 2 logs (p-value < 0.0001). Furthermore, after incubation with undiluted Clyraguard for either 30 minutes or 60 minutes, viral titers dropped below the limit of detection (<75 TCID50 per ml).
In this study, Clyraguard copper iodine complex was assessed for its ability to inactivate SARS-CoV-2 in liquid suspension. These data demonstrate that the product has significant viricidal activity against SARS-CoV-2 within 10 minutes and yields complete SARS-CoV-2 deactivation by 30 minutes.
Antiviral activity against human CoV viruses including SARS-CoV and MERS-CoV has been previously been demonstrated using iodine (Eggers et al., 2015; Eggers et al., 2018). The mechanism of action is not widely understood but researchers have hypothesized that iodine attacks viruses in multiple ways, attacking the protein structure and interfering with hydrogen bonding associated with cysteine, histidine, and tyrosine, thus altering virus membrane structure and causing inhibition of viral release and spread from infected cells (Qin, 2009).
Iodine-based materials such as PVP-I and Lugol’s solution have shown effective antiviral activity but also exhibit toxicity concerns and can only be tolerated on skin for short periods of time. The copper iodine complex investigated in this study has also been tested according to ISO 10993 standards (FDA submission data, see here) and found to be safe for both skin and wounds, suggesting that it may represent a potential alternative to current iodine-based regimens.
Long-term antimicrobial performance studies with organisms including Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumanii, Pseudomonas aeruginosa, Enterobacter aerogenes, Bacillus fragilis (FDA submission data, see here) have also been conducted with the Clyraguard formula, wherein it was found to be efficacious for up to 72 hours. It is therefore recommended that further studies be carried out under good laboratory practices to directly determine any extended activity against the SARS-CoV-2 virus. This would verify the potential extended use for PPE against SARS-CoV-2, potentially providing additional protection for healthcare professionals working during the COVID-19 pandemic.
In addition, further studies to assess the impacts (or lack thereof) of this copper iodine complex in combination with common face masks such as N95 masks on facial skin and wearer comfort are planned once a suitable and acceptable test method has been established.
Common existing decontamination practices used on PPE such as face masks include UV radiation, dry heat (ovens), and hydrogen peroxide vapor machines such as those approved for use by the FDA manufactured by Battelle and Steris (Rubio-Romero et al., 2020). While substantial evidence exists that supports the consistent antiviral efficacy of hydrogen peroxide vapor PPE decontamination devices (Steinberg et al., 2020), these devices typically require PPE to be reprocessed overnight due to the time required for adequate decontamination. The distinction between these decontamination techniques, which have commonly been used in hospitals during the SARS-CoV-2 pandemic and previous pandemics, and spray-on decontamination products such as the copper iodine complex Clyraguard is that the former require removal of the PPE followed by comparatively lengthy decontamination (typically overnight), whereas the latter is intended to be additional protection on the mask and can be used on-the-go without significant time commitment during a regular work day.
This study demonstrates clear evidence to the potential suitability of the copper iodine complex (Clyraguard) for decontaminating non-critical PPE to help mitigate cross-contamination of SARS-CoV-2. However, this study examined the efficacy of Clyraguard against SARS-CoV-2 only in liquid suspension, and therefore follow-up studies wherein this copper iodine complex is assessed for its efficacy against SARS-CoV-2 (and other viruses) adhered to materials used in personal protective equipment should also be conducted.
Figshare: In vitro efficacy of a copper iodine complex PPE disinfectant for SARS-CoV-2 inactivation - Raw Data in CSV. https://doi.org/10.6084/m9.figshare.12493682.v1 (Mantlo & Paessler, 2020).
This project contains the raw viral titers for each repeat produced in this experiment.
Data are available under the terms of the Creative Commons Zero "No rights reserved" data waiver (CC0 1.0 Public domain dedication).
We thank Drs. Kenneth Plante (The World Reference Center for Emerging Viruses and Arboviruses, UTMB) and Natalie Thornburg from the CDC for providing the SARS-CoV-2 stock virus. E.K.M was supported by NIH T32 training grant AI060549.
Views | Downloads | |
---|---|---|
F1000Research | - | - |
PubMed Central
Data from PMC are received and updated monthly.
|
- | - |
Competing Interests: No competing interests were disclosed.
Reviewer Expertise: My research focuses on the examination of factors influencing transmission of infectious diseases, including the influence of environmental conditions on the persistence of infectious material on surfaces and in aerosols.
Is the work clearly and accurately presented and does it cite the current literature?
Yes
Is the study design appropriate and is the work technically sound?
Yes
Are sufficient details of methods and analysis provided to allow replication by others?
Partly
If applicable, is the statistical analysis and its interpretation appropriate?
Partly
Are all the source data underlying the results available to ensure full reproducibility?
Partly
Are the conclusions drawn adequately supported by the results?
Yes
Competing Interests: No competing interests were disclosed.
Reviewer Expertise: My research focuses on the examination of factors influencing transmission of infectious diseases, including the influence of environmental conditions on the persistence of infectious material on surfaces and in aerosols.
Is the work clearly and accurately presented and does it cite the current literature?
Yes
Is the study design appropriate and is the work technically sound?
Yes
Are sufficient details of methods and analysis provided to allow replication by others?
Partly
If applicable, is the statistical analysis and its interpretation appropriate?
Yes
Are all the source data underlying the results available to ensure full reproducibility?
Partly
Are the conclusions drawn adequately supported by the results?
Yes
Competing Interests: No competing interests were disclosed.
Reviewer Expertise: Virology
Alongside their report, reviewers assign a status to the article:
Invited Reviewers | ||
---|---|---|
1 | 2 | |
Version 2 (revision) 07 Oct 20 |
read | |
Version 1 03 Jul 20 |
read | read |
Provide sufficient details of any financial or non-financial competing interests to enable users to assess whether your comments might lead a reasonable person to question your impartiality. Consider the following examples, but note that this is not an exhaustive list:
Sign up for content alerts and receive a weekly or monthly email with all newly published articles
Already registered? Sign in
The email address should be the one you originally registered with F1000.
You registered with F1000 via Google, so we cannot reset your password.
To sign in, please click here.
If you still need help with your Google account password, please click here.
You registered with F1000 via Facebook, so we cannot reset your password.
To sign in, please click here.
If you still need help with your Facebook account password, please click here.
If your email address is registered with us, we will email you instructions to reset your password.
If you think you should have received this email but it has not arrived, please check your spam filters and/or contact for further assistance.
Comments on this article Comments (0)